starquest.i-x.net Forum Index  
  FAQ  •  Search  • Photo Gallery  • Memberlist  •  Usergroups   •  Register  •  Profile  •  Log in to check your private messages  •  Log in
 CV JOINTS/AXLE SHAFTS View next topic
View previous topic
This forum is locked: you cannot post, reply to, or edit topics.This topic is locked: you cannot edit posts or make replies.
Author Message
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:49 pm Reply with quoteBack to top


Image
SPICER 816-2943 OUTTER BOOT.
SPICER 816-2951 INNER BOOT 88/89 $17 retail

EMPI 86-2161K OUTTER BOOT, EMPI 86-2179K INNER BOOT 88/89
EMPI Direct 800-666-3674 can tell you who is your nearest dealer.

Contact Napa but be VERY SPECIFIC on application!

NOTE:87s and earlier boots or with/without intercooler boots are differant. The boots are hard to tell apart (inner vs. outter) and won't be marked.
So mark them when you remove them from there boxes. Wink

View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:50 pm Reply with quoteBack to top

Image
View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:50 pm Reply with quoteBack to top

Image
View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:50 pm Reply with quoteBack to top

Image
View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:51 pm Reply with quoteBack to top

Image
View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:51 pm Reply with quoteBack to top

Image
View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:52 pm Reply with quoteBack to top

Did ya forget to install the BOOTS, first? Rolling Eyes
Then take it back-apart! Laughing

Image

View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:52 pm Reply with quoteBack to top

Image
View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:52 pm Reply with quoteBack to top

Image
View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue Mar 15, 2005 7:53 pm Reply with quoteBack to top

Image
View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue May 17, 2005 1:28 am Reply with quoteBack to top


Image
STOP! You only need to remove the CV "plug" if you need to rebuild the spindle. The "plug" was stuck in the spindle housing. Heating around the opening will make the flange expand and a couple taps with a chiesel will allow the plug to come out.

View user's profileSend private messageSend e-mail
JustPaus



Joined: 06 Oct 2004
Posts: 1640
Location: Gilbert, Arizona

PostPosted: Tue May 17, 2005 1:29 am Reply with quoteBack to top

Image
View user's profileSend private messageSend e-mail
Display posts from previous:      
This forum is locked: you cannot post, reply to, or edit topics.This topic is locked: you cannot edit posts or make replies.


 Jump to:   



View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Your source for the turbo charged Chrysler Conquest and Mitsubishi Starion forums and information.
Powered by phpBB © 2001, 2002 phpBB Group :: Theme & Graphics by Daz :: All times are GMT - 5 Hours